10/100/1000TX to 100/1000X SFP Media Converter

Our Products: Network Solutions
SKU: FO-065-1196 SFPDR
Dual-Rate 1000Base or 100Base SFP capability. Extremely low latency supports larger multi-hop networks. Extremely high reliability; MTBF of over 212 years. Gigabit transmission supports 9K bytes jumbo frames. IEEE 802.3x flow control for full duplex and back pressure for half duplex supported. DIP switch configuration for link fault signaling, fiber auto/force mode, and SFP speed. Full wire-speed forwarding rate. Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis.
GTIN: 763474168613
Price: $235.00
10/100/1000TX to 100/1000X SFP Media Converter
10/100/1000TX to 100/1000X SFP Media Converter
Product Details

  • APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control

  • PORTS

1 – RJ-45 10/100/10000BaseT/TX port plus
1 -Dual-rate 1000Base or 100Base SFP port

  • LED STATUS INDICATORS

Per Unit: Power; LFS Status; Full Duplex
Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
Per SFP Port: Link Fiber

  • PERFORMANCE


Latency: ≤1.6 μs (FIFO).
MTBF: 1,857,775.35 hours (212.07 years), calculated via the Part Stress Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Jumbo Frame Support: 9K packets supported

  • DIP SWITCH SETTINGS
 
No.DownUpNotes
1Disable LFSEnable LFSLFS: Link Fault Signaling function
2Enable Auto-Negotiation for TX portEnable Force mode for TX port 
3TX port Force mode: Full-duplexTX port Force mode: Half-duplex 
4TX port Force mode: 100 MbpsTX port Force mode: 10 Mbps 
5SFP at 100 MbpsSFP at 1000 Mbps 
6Function reservedFunction reserved 

 

  • ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

  • ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)

  • PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)

  • CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

  • WARRANTY

Limited Lifetime

//