- Slimmer diameter offers additional flexibility & easier routing through cable management
- Protection against ANEXT & EMI
- 100% factory tested per ANSI/TIA-568-C.2 to ensure category 6A component performance
- Supports performance of Power over Ethernet
- ETL verified screened 28 AWG stranded cable
- Snagless design protects the plug latch
- Meets IEEE 802.3an 10-Gigabit Ethernet transmission requirements
ANSI/TIA-568-C.2: meets or exceeds category 6A (1-500 MHz) specifications
4-pair stranded Unscreened Foil-screened Twisted Pairs.
Individually foil-screened twisted pairs under overall sheath (U/FTP)
ANSI/TIA-568-C.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)
Insulation Resistance: Min 500 MOhm @ 100 Vdc
Dielectric Withstanding Voltage:
1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
1,500 Vdc/ac peak contact-to-panel @ 60 Hz for 1 min
Contact Resistance: Max 20 mOhm
Current Rating: Refer to downloadable spec sheet.
Assembly: 4 pairs, 7 strands 28 AWG, F/UTP
Insulation: High density polyethylene
Plug Housing: UL listed 94V-0 flame retardant polycarbonate
IDC Blades: Phosphor bronze, min 50 μin of gold plating over 100 μin of nickel in contact area
Screen: Brass alloy plated with 100 Iin of nickel
Jacket:
Dimensions: Diameter < 0.25 in (6.35 mm)
Material: Flame retardant PVC compound
Retention: 50 N (11 lbf) for 60 ± 5 s
Mating Cycle Life: Min 750 cycles
Tensile Strength: ≥ 20 N per wire
Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
Operating RH: 93% Max (non-condensing)
ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd Ed., FCC Part 68, UL 1863, UL 94V-0
X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2,
1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD
5-year Limited Component
10-year Signamax Base Trunk
15-year Signamax Extended Component
25-year Signamax Cabling System
View Cart {{shoppingcart.totalQuantityDisplay}} Item(s)